How to Measure Full-Face Helmet for Child BMX


Daniel ST.

As a parent, ensuring your child’s safety is paramount, especially when they embark on BMX riding. One essential safety measure for young BMX enthusiasts is wearing a well-fitting full-face helmet. However, finding the right size can be challenging, as children’s heads come in various shapes and sizes.

To alleviate any confusion and guarantee maximum protection, knowing how to measure a full-face helmet correctly is crucial. By following a few simple steps, you can ensure your child’s helmet fits snugly, providing the utmost safety during their BMX escapades.

How to Measure Full-Face Helmet for Child BMX

How to Measure Full-Face Helmet for Child BMX

When it comes to measuring your child’s head for a full-face BMX helmet, it’s important to know exactly how to do it. You don’t want to end up with an ill-fitting helmet, and you also want to maximize the protection you get to keep your child safe. To help you accomplish this task, here is a quick, simple guide on how to measure full-face helmets for child BMX:

Use a Measuring Tape for Accurate Measurements

Accurate measurement of your child’s head circumference is crucial for selecting the right-sized helmet. To measure, wrap a flexible measuring tape around the widest part of their head.

Make sure the tape is level and snug but not overly tight. This ensures precise results and helps determine the appropriate helmet size.

Identify the Proper Location for Measurement

It’s important to identify the proper location on your child’s head to obtain accurate measurements. Place the measuring tape just above the eyebrows, where the head is the widest.

This ensures that the helmet will fit securely and comfortably without causing discomfort or obstructing vision. Taking measurements from the correct location guarantees a well-fitting helmet for optimal safety.

Check the Helmet Size Chart

Full-Face Helmet Size Chart

Helmet manufacturers often provide a sizing system specific to their products. Understanding this system is essential in selecting the appropriate helmet size for your child.

It may involve numerical measurements or age ranges associated with different sizes. Familiarize yourself with the manufacturer’s sizing system to ensure an accurate match between your child’s head circumference and the corresponding helmet size.

Match the Measurement with The Appropriate Helmet Size

After measuring your child’s head circumference, refer to the helmet size chart provided by the manufacturer. Locate the range that corresponds to your child’s measurement and identify the recommended helmet size.

Choosing a size that aligns closely with the measured circumference is important for a secure and comfortable fit. Matching the head circumference measurement with the appropriate helmet size ensures optimal protection during BMX rides.

How to Fit a Full-Face Child BMX Helmet

After taking your child’s measurement, zero in on a particular helmet that fits correctly with the information you have. However, just before you leave the store, testing out what you have is always a good idea. To do this, follow the guide below:

1. Choose the right helmet: Select a helmet that is specifically designed for children and meets the necessary safety standards for BMX riding. Look for a full-face helmet that provides coverage for the entire head, including the chin and face.

2. Measure the head size: Use a measuring tape to measure the circumference of your child’s head. Start about an inch above the eyebrows and wrap the tape around the widest part of the head. Take note of the measurement in centimeters or inches.

3. Check helmet size: Refer to the manufacturer’s sizing chart to determine the appropriate helmet size based on your child’s head measurement. Each helmet brand may have slightly different size ranges, so be sure to consult the specific sizing information for the helmet you have.

4. Adjust the helmet’s fit system: Most full-face BMX helmets have an adjustable fit system to ensure a snug and secure fit. This system typically consists of a dial or straps at the back of the helmet. Loosen the fit system to its maximum setting before putting the helmet on your child’s head.

5. Position the helmet: Place the helmet on your child’s head, aligning it horizontally so that it sits level. The front of the helmet should be about an inch above the eyebrows. The helmet’s chin guard should cover the entire chin and be snug against it.

6. Adjust the fit system: Start tightening the fit system by turning the dial or pulling the straps. Gradually adjust it until the helmet feels snug and secure on your child’s head. Make sure it doesn’t tilt forward or backward and that there are no gaps between the helmet and the head.

7. Check the side straps: The side straps should form a “V” shape under each ear, with the bottom of the “V” just below the earlobe. Adjust the side straps if necessary to achieve this positioning. Ensure the straps are snug but not too tight, allowing your child to open their mouth comfortably.

8. Test the fit: Once the helmet is properly adjusted, ask your child to move their head from side to side, nod up and down, and shake their head gently. The helmet should stay securely in place without any excessive movement.

9. Check chin strap: Fasten the chin strap and adjust it so that it fits comfortably under the chin. The strap should be snug but not overly tight. It should allow your child to breathe and speak without restrictions.

10. Final adjustments: Double-check all the adjustments you made, including the fit system, side straps, and chin straps. Ensure that the helmet fits securely, provides adequate coverage, and doesn’t obstruct your child’s vision.

Following these step-by-step instructions, you can properly fit a full-face child BMX helmet, ensuring maximum protection and comfort during their rides.

What Size Bike Helmet Does My Child Need?

The recommended circumference for children aged 2 to 4 years is typically between 51 to 53 cm. A children’s bicycle helmet ranging from 48 to 52 cm would be suitable for most children in this age group. As children grow older, around 4 years and above, it is advisable to consider a helmet with a circumference greater than 53 cm.

Does My Child Need a Full-Face Helmet?

Generally, a full-face helmet is usually unnecessary for most types of cycling, especially when your child is learning to ride or cycle on roads. In these situations, opting for a full-face helmet might introduce more safety concerns rather than solving them. It’s important to assess the specific riding circumstances and choose a helmet that provides appropriate protection without impeding safety.

Are Full-Face Helmets Safer for Kids?

Full-face helmets provide additional protection, particularly with a chin guard. These helmets can be a lifesaver in the unfortunate event of a crash. While a standard helmet offers safeguarding for the head and a significant portion of the forehead, it leaves the face, chin, and mouth vulnerable to potential injuries.

Final Thought

A properly fitted helmet is of utmost importance when it comes to ensuring your child’s safety during BMX adventures. A well-fitted helmet offers the best protection for your child’s head in case of any impact or fall. It reduces the risk of serious injuries and promotes a safer riding experience. On the other hand, ill-fitting helmets may not provide adequate protection and can be uncomfortable to wear. As parents, it’s essential to prioritize helmet fit and invest time in selecting the right size for your child’s head.

Leave a Comment

Address: 3288 Pierce Street, Suite A-118, Richmond, California, 94804

Phone: (510) 526-6800